Suchergebnisse

It is critical for dishwasher manufacturers to design the front door hinge system and the structural components of a dishwasher assembly in terms of appearance and satisfying functional requirements. Since dishwasher users and ...

For 50 years, AREVA TN has been supplying customer-focused, innovative transportation and storage solutions for radioactive material with the highest levels of safety and security. Transportation and storage casks are designed to ...

He will discuss several of the options available with the *CONTACT keyword, with an emphasis on MPP and recently developed options. Examples will be shown, with suggestions for situations where various options might be useful.

This article in the first part deals with the experimental measurement of the material data used for explicit computational FEM analyses. The second part of this paper devotes practical application of the FEM simulation in fuel tank ...

When analyzing a failure or crack propagation problem by FEM, there are the following challenges to solve. (1)It’s necessary to make element boundary match to the failure surface or the crack surface. (2)The failure shape and the ...

In this paper, the ballistic impact test is described in which fragment simulating projectiles (FSPs) have been used against thick plates made of an aluminum alloy. To perforate the plates, the projectiles must have reached velocities ...

The purpose of this research is to develop a fully-tabulated, anisotropic, asymmetric and rate dependent material model for solid elements. Physical tests of several metallic materials have shown to have anisotropic (or orthotropic) ...

Accurately and efficiently simulating strongly coupled fluid structure interactions has been a challenge. In this presented study, the interaction of a lab-scale experiment using an automotive roof panel with an air flow applied ...

The use of software for the simulation of airflow around ground vehicles plays an important role in the design of a vehicle. Traditionally companies within the automotive industry sector have a Computational Fluid Dynamics department ...

The 64 km/h frontal offset test is run with a deformable barrier, and the first numerical model of this barrier was made with solid elements to represent the honeycomb blocks. However this required development of a special element ...