Suchergebnisse

Sheet metal forming is one of the most important manufacturing processes. Computer simulation has become the tool for modeling such processes and also for predicting the springback in the final part. The talk will deal with two ...

Damage and fracture are important criteria in the design of products and processes. Damage mod- els can be used to predict ductile failure in metal forming processes. Nonlocal models avoid the mesh dependency problems of local damage ...

Tube hydroforming is one type of unconventional metal forming process in which high fluid pressure and axial feed are used to deform a tube blank in the desired shape. Bi-layered tube hydroforming is suitable to produce bi-layered ...

With a steady increase in computational power and decrease in hardware costs during the last few years, the incremental process simulation in the area of sheet metal forming is considered a state-of- the-art tool during the ...

Today’s stretch forming technologies mainly are used for production of large and flat parts made of sheet metal mainly for the aircraft industry (wing fabrication) and for shipbuilding. Because of the high investment costs and high ...

Nowadays, despite powerful simulation programs, the tool design process still contains manual and not reproducible work. In specific, the manual die spotting is mostly dependent on the workers experience and consumes a lot of time. A ...

For several years the “Centre d’Etudes de Gramat (CEG)” has been studying the behaviour of materials by means of experimental devices using High Pulsed Powers technologies. Among them, GEPI is a pulsed power generator devoted to ramp ...

This paper present a new material model (*MAT_244) in LS-DYNA capable of simulating phase transition during quenching and forming. Usually during forming the blank is initially heated to become fully austenitized and then continuously ...

Due to the increasing number of body-in-white parts that are manufactured by hot forming of boron alloyed sheet metal (22MnB5), the demand for a virtual representation of this specific manufac- turing process is evident. ...

Presented is a methodology for finite element modeling of the continuous press hardening of car components using ultra high strength steel. The Numisheet 2008 benchmark problem BM03 [1] is selected as the model problem to be solved. ...